
Home › Sourcing Map › Auto parts
Five product families, five different supply bases
Metal stamping & progressive dies
Brackets, reinforcements, chassis pieces and the tooling that makes them. The delta's die shops supply both vehicle programmes and independent buyers; tooling is the real product, parts follow it — and published die quotes spread thirty-fold (what a die should cost).
Interior trim & soft parts
Seat covers, door cards, headliners, floor mats, armrests. Labour-intensive, fabric-dependent and much friendlier to small orders than metal parts.
Wiring harnesses
Cut, crimped, taped and tested to a drawing. Cheap to make, expensive to get wrong — a wrong terminal position is a fire risk, not a cosmetic defect.
Castings & machined components
Aluminium and iron castings, then turning, milling and surface treatment. Quality lives in the material certificate and the dimensional report.
Aftermarket & accessories
Filters, lamps, mirrors, trim clips, universal accessories. Sold by catalogue, open to small volumes, and the practical entry point for most independent buyers.
Where each belt sits geographically — Wuhu for the full vehicle-supply ecosystem, Guangde for stamping and dies, Taizhou for accessories — is covered in the Wuhu guide and the Guangde guide.
The tier question, answered honestly
Tier one and tier two suppliers feeding a vehicle plant run programmed volume, formal quality systems and an onboarding process measured in weeks. A 200-piece order will not be quoted — and if it is, you are usually talking to a trading company that has the supplier's catalogue and a margin.
The workable sequence for an independent buyer: aftermarket or accessory products first (open catalogues, small volumes, real factories), tooling and secondary processes second (dies, fixtures, surface treatment), and programme parts only with a quality system and a volume plan. Being honest about which tier you are buying from prevents most of the disappointment in this category.
What to put in the brief
- A drawing, not a description. Tolerances, material grade, surface treatment, and the critical dimensions marked. "Same as OEM" is not a specification.
- Volume and cadence. First order and annual estimate — suppliers price differently for one-off, seasonal and continuous.
- Destination market and certification need. EU road-use parts may need E-mark documentation, aftermarket brands need packaging compliance, and the answer changes who can quote.
- Packaging. Carton, pallet, rust protection, and whether parts ship as kits. Packaging disputes are the most common cause of a rejected container after a passable production run.
The checks that matter
1 · Quality system, with a scope
Ask for the IATF 16949 certificate and read the scope. If a supplier claims OEM programmes, the certificate should cover the products you are buying. A logo on a brochure proves nothing.
2 · Which programmes the line feeds
Then whether your part comes off the same line and process. A factory can be excellent and still not have run your product family before.
3 · Dimensional report against your drawing
With material or steel certificates, tied to your batch. Random checks by eye do not establish tolerance compliance on a stamped or machined part.
4 · Carton-by-carton part number check
The classic failure: 480 pieces, four cartons, one carton carrying the wrong variant. It is invisible to sampling and obvious when you open every carton — which is why the packing list must match physically, not on paper.
5 · Payment staged to evidence
Deposit, tooling or production milestones, balance after inspection — the staged-payment rule. In tooling-heavy categories this is what separates a delay from a loss.
What an inspection costs here
A container of parts normally needs a full AQL pre-shipment inspection — a man-day job, typically US$190–400 depending on the firm. A fixed-fee local visit at US$60 for up to 90 minutes is the right tool before you place an order: checking a sample, a tool, or a small lot at a seller's warehouse. The comparison by inspection type, with 2026 price bands, is in what inspections cost in China.
Common questions
Can a small buyer source auto parts from China?
Yes — from the aftermarket, accessories and tooling shops, not from the OEM tier. Tier one and two suppliers run programmed volume and will not quote 200 pieces; a "tier one" quotation at small volume is usually a trading company.
Is IATF 16949 mandatory?
It is the standard the automotive chain works to, and any supplier claiming OEM programmes should show a current certificate. Check the scope against your product, not the logo. Aftermarket suppliers often do not hold it, which is fine if you know.
What documents should come with a batch?
Dimensional report against your drawing, material certificate, and sample approval tied to your part number. Cartons and markings must match the packing list line for line — mixed part numbers in identical cartons is the most common defect found at inspection.
How much does an auto parts inspection cost?
A full AQL pre-shipment inspection is a man-day, typically US$190–400. A fixed-fee local visit — 90 minutes, video and a written report — is US$60 and suits pre-order checks and small lots.
Sourcing a part, a die or a trim programme?
Send the drawing, the volume and the destination market. We will tell you which tier will realistically quote it, what the MOQ looks like, and what we would verify before any tooling or deposit money moves.
Start the conversation